Davey forces through energy plant despite Osborne opposition

12/10/2012

In yet another example of the coalition government’s division on energy matters the UK energy secretary Ed Davey has pushed through approval for a giant energy from waste plant in the Chancellor of the Exchequer, George Osborne’s Cheshire constituency.

Mr Osborne was first to sign a 25,000-strong petition against building the plant that will devour 600,000 tonnes of rubbish every year.


  However Mr Davey’s approval means only a high court challenge can stop the plant, run by E.ON and Tata, from going ahead.

 "I campaigned hard against the incinerator and am, therefore, naturally disappointed with the decision," he told constituents, many of whom were enraged by the decision.

 The facility will power Tata's nearby chemicals plant.

For more renewable energy news

     

 

Share
     

Font Sizes:
Recommend this article Recommend this article () Yo recommended this article Yo recommended this article ()
Follow Power Engineering International on Twitter

Editor's Picks

E.ON in talks with regulator over gas power plant problems

E.ON is seeking assistance from the German regulator to support what it calls the world’s most efficient combined-cycle ga...

EDF may pull out of UK nuclear warns French expert

A leading authority on the French nuclear power industry has warned that debt-ridden EDF may not be able to sustain its in...

Alstom awarded $969m contract

Alstom, the French engineering group, has been awarded a contract to provide equipment for a 3.1 GW oil-fired power plant ...

More problems at Fukushima

Two years on from the tsunami that caused explosions at the plant, Fukushima Daiichi nuclear power plant has recorded two ...

Rosatom in contention to build new Finnish nuclear plant

The prospect of Russian involvement in the next Finnish nuclear power plant will be up for discussion when Russian Prime M...

PEI Magazine Issues



>> Current Issue           >> Past Issues

Power Engineering International

Article Archives for Power Engineering International Magazine